Missing headerfile "candef.h" while trying to generate code for raspberry pi
1 visualización (últimos 30 días)
Mostrar comentarios más antiguos
Pascal Viertel
el 28 de Mayo de 2018
Respondida: Swati Lodha
el 5 de Jun. de 2018
I get the following error when i try to simulate in external mode on my raspberry pi Bv2. Im using CAN blocks from the Vehicle Network Toolbox. Simulating in "normal" - mode works perfectly. Do i need to include the headerfile in a manual way or why is it missing on my target?
Error executing command "touch -c /home/pi/Controller_xPC_ref_ert_rtw/*.*;make -f Controller_xPC_ref.mk all -C /home/pi/Controller_xPC_ref_ert_rtw". Details:
STDERR: In file included from Controller_xPC_ref.c:20:0: Controller_xPC_ref.h:29:21: fatal error: can_def.h: No such file or directory
#include <can_def.h> ^
compilation terminated.
make: *** [Controller_xPC_ref.c.o] Error 1
STDOUT:
make: Entering directory '/home/pi/Controller_xPC_ref_ert_rtw' echo "###
Compiling "Controller_xPC_ref.c" ..." ### Compiling Controller_xPC_ref.c ... gcc -c -MMD -MP -MF"Controller_xPC_ref.c.dep" -MT"Controller_xPC_ref.c.o" -O0 -DMODEL=Controller_xPC_ref -DNUMST=3 -DNCSTATES=0 -DHAVESTDIO -DON_TARGET_WAIT_FOR_START=1 -DONESTEPFCN=1 -DEXT_MODE=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0
-DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DRT -DUSE_RTMODEL -DERT -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__
-DARM_PROJECT -D_USE_TARGET_UDP_ -D_RUNONTARGETHARDWARE_BUILD_ -DSTACK_SIZE=64 -DONESTEPFCN=1 -DEXT_MODE=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0
-DALLOCATIONFCN=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DRT -DUSE_RTMODEL -DERT -DARM_PROJECT -D_USE_TARGET_UDP_ -D_RUNONTARGETHARDWARE_BUILD_ -DSTACK_SIZE=64 -DMODEL=Controller_xPC_ref -DNUMST=3 -DNCSTATES=0 -DHAVESTDIO -I./ -o "Controller_xPC_ref.c.o" "Controller_xPC_ref.c" Controller_xPC_ref.mk:510: recipe for target 'Controller_xPC_ref.c.o' failed make: Leaving directory '/home/pi/Controller_xPC_ref_ert_rtw'
0 comentarios
Respuesta aceptada
Swati Lodha
el 5 de Jun. de 2018
Since simulation in "normal" mode works fine, so it seems like you're using blocks which might be incompatible for code generation, causing error in external mode.
I'd recommend you to verify the same.
The Simulink Block Data Type Support Table describes the data types that are supported by the blocks in the main Simulink and Fixed-Point libraries. The table also identifies blocks that are suitable for production code generation. You can view the table by typing the MATLAB command:
>> showblockdatatypetable
Alternatively, you can open an existing model or create a new model, then in the model window click on Help -> Block Support Table.
0 comentarios
Más respuestas (0)
Ver también
Categorías
Más información sobre Run on Target Hardware en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!