Inner matrix dimensions must agree

1 visualización (últimos 30 días)
Ben Newton
Ben Newton el 28 de Oct. de 2019
Comentada: Rena Berman el 12 de Dic. de 2019
%ben newton swansea university 956205
k = 997.584; %stiffness, units = N/m
m = 10.692; %mass, units = kg
xo = 0.026844; %initial displacement, units = m
vo = 0:0.001:5; %initial velocity, units = m/s
t = 0.735; %time, units = s
x = 0.0852; %dispacement, units = m
c = 36.84; %damping coefficient, units = kg/s
wn = sqrt(k/m); %natural frequency, units = rad/s
ccrit = 2*sqrt(k*m); %critical damping coefficient, units = kg/s
zeta = c/ccrit; %damping ratio, no units
wd = wn*sqrt(1 - zeta^2); %damped natural frequency, units = rad/s
A = sqrt((vo+zeta*wn*xo).^2 + (xo*wd)^2/wd^2);
phi = atan((xo*wd)./vo+zeta*wn*xo); %phase angle, units = radians
x@time = A.*exp(-zeta.*wn.*t)*sin((wd.*t)+phi);
%everythings fine up until the last line, gives the error using * inner matrix dimensions must agree
all matrices used are the same shape an size etc and .* has been used
but i still get the error message
please help
  3 comentarios
Stephen23
Stephen23 el 8 de Nov. de 2019
Original question:
%ben newton swansea university 956205
k = 997.584; %stiffness, units = N/m
m = 10.692; %mass, units = kg
xo = 0.026844; %initial displacement, units = m
vo = 0:0.001:5; %initial velocity, units = m/s
t = 0.735; %time, units = s
x = 0.0852; %dispacement, units = m
c = 36.84; %damping coefficient, units = kg/s
wn = sqrt(k/m); %natural frequency, units = rad/s
ccrit = 2*sqrt(k*m); %critical damping coefficient, units = kg/s
zeta = c/ccrit; %damping ratio, no units
wd = wn*sqrt(1 - zeta^2); %damped natural frequency, units = rad/s
A = sqrt((vo+zeta*wn*xo).^2 + (xo*wd)^2/wd^2);
phi = atan((xo*wd)./vo+zeta*wn*xo); %phase angle, units = radians
x@time = A.*exp(-zeta.*wn.*t)*sin((wd.*t)+phi);
%everythings fine up until the last line, gives the error using * inner matrix dimensions must agree
all matrices used are the same shape an size etc and .* has been used
but i still get the error message
please help
Rena Berman
Rena Berman el 12 de Dic. de 2019
(Answers Dev) Restored edit

Iniciar sesión para comentar.

Respuestas (1)

Katie
Katie el 28 de Oct. de 2019
You're missing a dot in front of the * in front of the sin
x_time = A.*exp(-zeta.*wn.*t).*sin((wd.*t)+phi);

Categorías

Más información sobre Programming en Help Center y File Exchange.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by