- For ode45 you give numerical functions, not symbolic ones
- There were some variables that were used in the function but initialized after the loop
- If you have time dependent variables, you ideally should define them inside the function
- Your variable order in the function was inverted
- You didn't declared v0 anywhere
Error. I want to plot this ode45 pressure versus time
2 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Ous Chkiri
el 3 de Nov. de 2019
Comentada: Ous Chkiri
el 3 de Nov. de 2019
R=8.314/32;
T0=2930;
a=(12)/((2.027*10^6)^0.45);
rhoP=1920;
Astar=pi*0.25^2;
k=1.35;
n=0.45;
P0=101325;
syms P(t)
for t = [0,0.1]
dP=@(P,t)(Ab*a*P^n*(rhoP-rhoO)-P*Astar*sqrt(k/(R*T0))*(2/(k+1))^((k+1)/(2*(k-1))))*R*T0/v0;
[P,t]=ode45(dP, [0,0,1], P0);
end
if t==0 %at beginning of the integration set initial values for the persistent variables
rp=0.35; %initial port radius
t1=0; %initial time step
end
Ab=2*pi*rp*8;%burn area
rhoO=P/(R*T0); %gas density
rp=min(rp+((a*P^n)*10^-3)*(t-t1),0.7);
figure(2)
plot(t,y)
xlabel("Time (s)")
ylabel("Chamber Pressure (Pa)")
title("Chamber Pressure vs Time (Start-Up)")
0 comentarios
Respuesta aceptada
Thiago Henrique Gomes Lobato
el 3 de Nov. de 2019
Editada: Thiago Henrique Gomes Lobato
el 3 de Nov. de 2019
There were some errors in your code:
I choosed a random value for v0 and fix the other issues of your code, you just have to make sure that the considerations you made for your function and variables are right to fully trust the results.
R=8.314/32;
T0=2930;
a=(12)/((2.027*10^6)^0.45);
rhoP=1920;
Astar=pi*0.25^2;
k=1.35;
n=0.45;
P0=101325;
P = P0;
%syms P(t)
%at beginning of the integration set initial values for the persistent variables
rp=0.35; %initial port radius
t1=0; %initial time step
rhoO=P/(R*T0); %gas density
rp=min(rp+((a*P^n)*10^-3)*(t1-t1),0.7);
Ab=2*pi*rp*8;%burn area
v0 = 0.1;
dP=@(t,P)Fun(t,P,R,T0,rp,a,n,t1,Ab,rhoP,Astar,k,v0);%@(t,P)(Ab.*a.*P.^n.*(rhoP-rhoO)-P.*Astar.*sqrt(k/(R.*T0)).*(2/(k+1)).^((k+1)/(2.*(k-1)))).*R.*T0./v0;
[t,P]=ode45(dP, [0,0.1], P);
y = P;
figure(2)
plot(t,y)
xlabel("Time (s)")
ylabel("Chamber Pressure (Pa)")
title("Chamber Pressure vs Time (Start-Up)")
function dP = Fun(t,P,R,T0,rp,a,n,t1,Ab,rhoP,Astar,k,v0)
rhoO=P/(R*T0); %gas density
rp=min(rp+((a*P^n)*10^-3)*(t-t1),0.7);
Ab=2*pi*rp*8;%burn area
dP = (Ab.*a.*P.^n.*(rhoP-rhoO)-P.*Astar.*sqrt(k/(R.*T0)).*(2/(k+1)).^((k+1)/(2.*(k-1)))).*R.*T0./v0;
end
0 comentarios
Más respuestas (1)
Ous Chkiri
el 3 de Nov. de 2019
2 comentarios
Thiago Henrique Gomes Lobato
el 3 de Nov. de 2019
If you have conditions that make a discontinuity you will have to perform the integration in a piece-wise matter and add the conditions in your integration function ("Fun" in the example I gave you). This answer and comments shows an example about how you could do it and also possible pitfalls https://de.mathworks.com/matlabcentral/answers/487643-adding-a-piecewise-time-dependent-term-in-system-of-differential-equation#answer_398394?s_tid=prof_contriblnk
Ver también
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!