Issue Connecting to ROS Network on another computer. "Cannot connect to ROS master"
34 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Colin Szajner
el 26 de Nov. de 2019
Respondida: Fazal Rahaman Pasha
el 6 de Nov. de 2024 a las 20:58
I have been following tutorials online and those provided by Mathworks such as the one linked here:
I am running MATLAB on a Windows 10 computer while running a ROS master on Ubuntu on a separate one.
I used hostname -I to find the ip address of the computer running the ROS master, and attempted to use rosinit('IPaddress') in MATLAB and other methods such as those mentioned in the tutorial and it fails to connect.
The error is "Cannot connect to ROS master at http://IPaddress:11311. Check the specified address or hostname." Where IPaddress is the address gotten using hostname -I in a linux terminal.
I have no firewall on Ubuntu, and I turned off the firewall on my windows pc to no avail as well.
Both are on the same network/internet (my home internet).
Running roscore, my ROS_MASTER_URI is http://localhost:11311. I am using Ubuntu 16.04 and ROS Kinetic.
Any idea how to fix this issue?
2 comentarios
Cam Salzberger
el 5 de Dic. de 2019
Rather than hostname -l, can you try running "ifconfig" on your Ubuntu machine. That should be a more accurate IP address than what is provided by Windows attempting to resolve the hostname.
Also, try pinging both directions (Windows to Ubuntu at that IP, and Ubuntu to Windows at the Windows IP seen by "ipconfig") to make sure communication in general can get through.
Respuestas (2)
Robert Watson
el 22 de Abr. de 2023
I think the problem might be your ROS_MASTER_URI on the computer running roscore. If this is set to local host it can prevent other nodes on the network from accessing it.
To allow external connection, ROS_MASTER_URI set on the host PC should contain its own IP address on the network.
i.e. Both the core host and the client PC should set ROS_MASTER_URI=http://IPaddress:11311
0 comentarios
Fazal Rahaman Pasha
el 6 de Nov. de 2024 a las 20:58
I re-installed the Ros toolbox, and I was not executing "setenv()" function, and executed rosinit.
This worked for me.
0 comentarios
Ver también
Categorías
Más información sobre Network Connection and Exploration en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!