Error using eig Input matrix contains NaN or Inf.

%{
System with only kinematics and no dynamics 
Differential drive mobile motor (KinematicDDMR)
no. of states = 6: [x, y, theta, cos(theta), sin(theta), time]
no. of inputs = 2: [Vr, Vl]
total states = 8
kinematics:- 
1) X_dot = ((Vr+Vl)/2)*cos(theta)
2) y_dot = ((Vr+Vl)/2)*sin(theta)
3) theta_dot = (Vr-Vl)/L
4) cos(theta)_dot = -sin(theta)*(Vr-Vl)/L
5) sin(theta)_dot = cos(theta)*(Vr-Vl)/L
6) t_dot = 1
u_dot = u/eps +v/eps ; eps ===> 0
X_dot = [A G;0 1/eps]*Z_bar +B*v;
v* = (B'M'P'Z_bar)/eps
%}
% System Variable
syms x1 x2 x3 x4 x5 x6 x7 x8 c
x = [x1; x2; x3; x4; x5; x6; x7; x8];
nx = length(x); 
nXu = 2; %inputs
Zbar = monomials(x,[0:1]);
nZ = length(Zbar);
nZs = nZ-nXu;
% Constants
a = 0.22; % max velocity (m/s)
epss = 1e-04;
eps = 0.1;
m = 1.5; % mass (Kg)
d = 100;   % Delta (penalty on final destination)
L = 0.16;  % length between wheels (m)
A = zeros(nx,nZs);
A(6,1)=1;
R=zeros(nZ,nZ); %(Z'*R*Z) = 1/2[(m*Vr^2)+(m*Vl^2)]
R(8,8)= m/2; R(9,9)= m/2;
G(1,1)=x4/2; G(1,2)=x4/2; G(2,1)=x5/2; G(2,2)=x5/2;
G(3,1)=1/L; G(3,2)=-1/L; G(4,1)=-x5/L; G(4,2)=x5/L;
G(5,1)=x4/L; G(5,2)=-x4/L; G(6,1)=0; G(6,2)=0;
G(7,1)=eps; G(8,2)=eps;
B = zeros(nx,nXu);
B(7,1)=eps; B(8,2)=eps;
Abar = [A G];
for i=1:nZ
    for j = 1:nx
        M(i,j) = diff(Zbar(i),x(j));
    end
end
%initial conditions
x1=20; x2=30; x3=pi/3; x4=0; x5=0; x6=0; x7=0; x8=0;
Zi = subs(Zbar);
% final conditions
x1=0; x2=0; x3=0; x4=0; x5=0; x6=0; x7=0; x8=0; 
Zf = subs(Zbar);
% reinstating the system variables
syms  x1 x2 x3 x4 x5 x6 x7 x8 c
% sos program starts
prog = sosprogram(x);
% Bounding Inputs ( -0.22 < Vr, Vl < 0.22 )
prog = sosineq(prog,a^2-(x(7,1))^2);
prog = sosineq(prog,a^2-(x(8,1))^2);
% Decision variable 
prog = sosdecvar(prog,c);
[prog,pbar] = sospolymatrixvar(prog,monomials(x,0),[nZ,nZ],'symmetric');
%pbar = p^-1;
% inequality equations
H = -M*Abar -transpose(M*Abar) + (1/eps)*M*B*transpose(M*B);
SC = [H pbar*(R^(1/2));(R^(1/2))*pbar eye(nZ,nZ)];
SC2 = [c [Zi;Zf]';[Zi;Zf] [pbar zeros(nZ,nZ);zeros(nZ,nZ) (1/(d-1)).*pbar]];
% Sos inequality constraints
prog = sosmatrixineq(prog,pbar-epss*eye(nZ,nZ),'quadraticMineq');
prog = sosmatrixineq(prog,H-epss*eye(nZ,nZ),'quadraticMineq');
prog = sosmatrixineq(prog,SC-epss*eye(nZ+nZ,nZ+nZ),'quadraticMineq');
prog = sosmatrixineq(prog,SC2-epss*eye(1+nZ+nZ,1+nZ+nZ),'quadraticMineq');
% sos objective
obj = c;
prog = sossetobj(prog,obj);
% sos solve
prog = sossolve(prog);
%get solution
c = sosgetsol(prog,c);
pbar = sosgetsol(prog,pbar);
p = pbar^(-1);
vstar = (transpose(transpose(Zbar)*p*M*B))/eps;
xdot = Abar*Zbar + B*vstar;
echo off;

Error using eig
Input matrix contains NaN or Inf.
Error in minpsdeig (line 73)
        eigv(i) = min(eig(XX));
Error in maxstep (line 64)
    mindxs = minpsdeig(reldx, K);
Error in wregion (line 99)
        maxt1 = min(maxstep(dx,xc,uxc,K), maxstep(dz,zc,uzc,K));
Error in sedumi (line 467)
        wregion(L,Lden,Lsd,...
Error in sossolve (line 149)
	[x,y,info] = sedumi(At,b,c,K,pars);
Error in kinematicDDMR2 (line 97)
prog = sossolve(prog);

Answer 1

[Christine Tobler]

The function sossolve is part of a third-party tool, this seems to be their website: http://www.cds.caltech.edu/sostools/. It's probably best to contact them directly to get feedback on this.

The issue in EIG is that the input variable to it contains Inf or NaN values, meaning something has gone wrong in the computation before EIG was called. If you want to investigate yourself, you could step through using the debugger to try to find out when the Inf / NaN values first occur.