Support Teensy Hardware?!

I have a Simulink Model and a Arduino Due and the model runs perfectly on the Due, so there were no issues to compile the Model onto the Due board. Because of hardware dimensions i am trying to deploy the model to a smaller board, therefore i want to use a Teensy 4.0. Is there a way to deploy the Simukink-Model to the Teensyboard ?!

[Thomas Christ]

Yes this would be really cool!

Answer 1

[Chidvi Modala]

Teensy is not supported yet. For a full list of supported hardware, you can refer to the link below:

https://www.mathworks.com/hardware-support.html?q=&page=1

I have brought this issue to the concerned people and it might be considered in any future release. You can also use the 'Request Hardware Support' option on the top of the page to indicate interest in this hardware.

If you wish to create your own custom target, you can refer to the tutorial below. Note that it would require Embedded Coder.

https://www.mathworks.com/videos/series/how-to-develop-a-custom-embedded-coder-target-for-an-arm-cortex-a-based-hardware-platform-121440.html

[Robert]

It's been three years. Really?

[Nathaniel]

@Chidvi Modala, any updates on where this feature implmentation might be in the development pipeline? I am also interested in interfacing Simulink with a Teensy microcontroller (Teensy 4.1, to be exact). This little microcontroller is extremely capable and seems quite popular.

[Ali Alramadhan]

just to share with you about the development of "Simulink Embedded Coder Target for Teensy" by Stefano Lovato

you can access it from file exchange

https://www.mathworks.com/matlabcentral/fileexchange/135922-simulink-embedded-coder-target-for-teensy

or from github

https://github.com/stefphd/teensy_ert