Dynamic array storage with for loop

18 Mayo 2020
3 Respuestas
Respuesta aceptada
Actualizado a las 3 Jun. 2020
2 Visualizaciones (30 días)

0 votos

D = 0.067;
Ugs = [0.047,0.061,0.288,0.344,0.404,0.544,0.709,0.945,1.418,1.891,2.363,2.836,4.727];
Uls = ones(1,13)*0.047;
Uls1 = ones(1,13)*0.071;
Uls2 = ones(1,13)*0.095;
Uls3 = ones(1,13)*0.142;
g = 9.81;
rho_gas=1.18;
rho_liq=900;
Ugs_aht= Ugs *((rho_gas).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls_aht= Uls *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls1_aht= Uls1 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls2_aht= Uls2 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls3_aht= Uls3 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
print(Uls_aht, Uls1_aht,Uls2_aht,Uls3_aht)
C = ((Ugs_aht).^0.5) + ((Uls_aht).^0.5);
C1 = ((Ugs_aht).^0.5) + ((Uls1_aht).^0.5);
C2 = ((Ugs_aht).^0.5) + ((Uls2_aht).^0.5);
C3 = ((Ugs_aht).^0.5) + ((Uls3_aht).^0.5);
flow = ones(1,13);
flow = string('flow');
for i = 1:13
if C <= 0.2(i)
flow(i)= 'Bubble'
if C1 <= 0.89(i)
flow(i)= 'Slug'
if C2 <= 0.98(i)
flow(i)= 'Transition'
if C3 >= 1.00(i)
flow(i)= 'Churn'
end
end
end
end
% end
Ugs = Ugs.';
Usl = Usl.';
Usl1 = Usl1.';
Usl2 = Usl2.';
Usl3 = Usl3.';
C = C.';
C1 = C1.';
C2 = C2.';
C3 = C3.';
Uls_aht = Uls_aht.';
Uls1_aht = Uls1_aht.';
Uls2_aht = Uls2_aht.';
Uls3_aht = Uls3_aht.';
% flow = flow.';
T = table(Ugs,Uls_aht,Uls1_aht,Uls2_aht,Uls3_aht,C,C1,C2,C3)

Iniciar sesión para responder a esta pregunta.

 Respuesta aceptada

Temidayo BOBOYE
Temidayo BOBOYE el 3 de Jun. de 2020

0 votos

D = 0.067;% Diameter of tube in meters
Ugs = [0.047,0.061,0.288,0.344,0.404,0.544,0.709,0.945,1.418,1.891,2.363,2.836,4.727];
Uls = ones(1,13)*0.047;
Uls1 = ones(1,13)*0.071;
Uls2 = ones(1,13)*0.095;
Uls3 = ones(1,13)*0.142;
Uls4 = ones(1,13)*0.284;
Uls5 = ones(1,13)*0.378;
g = 9.81;% Acceleartion due to gravity (m/s^2)
rho_gas=1.18;% Gas density (Kg/m^3)
rho_liq=900;% Liquid density (Kg/m^3)
for i = 1:13
Ugs_aht(i)= Ugs(i) *((sqrt(rho_gas))/(sqrt(g * D *(rho_liq - rho_gas))));
end
Uls_aht= Uls *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht1= Uls1 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht2 = Uls2 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht3 = Uls3 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht4 = Uls4 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht5 = Uls5 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
C = (sqrt(Ugs_aht)) + (sqrt(Uls_aht));
C1 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht1));
C2 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht2));
C3 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht3));
C4 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht4));
C5 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht5));
Ugs =Ugs.';
Uls = Uls.';
Uls1 = Uls1.';
Uls2 = Uls2.';
Uls3 = Uls3.';
Uls4 = Uls4.';
Uls5 = Uls5.';
Ugs_aht = Ugs_aht.';
Uls_aht = Uls_aht.';
Uls_aht1 = Uls_aht1.';
Uls_aht2 = Uls_aht2.';
Uls_aht3 = Uls_aht3.';
Uls_aht4 = Uls_aht4.';
Uls_aht5 = Uls_aht5.';
C = C.';
C1 = C1.';
C2 = C2.';
C3 = C3.';
C4 = C4.';
C5 = C5.';
plot(C,Ugs_aht,'--r')
xlabel('C (sqrt(m/s))')
ylabel('Ugs_aht (m/s)')
title('Flooding Mechanism')
T= table(Ugs, Uls,Uls_aht, Ugs_aht, C,C1,C2,C3,C4,C5);
hold on
plot(C1,Ugs_aht,'--b')
hold on
plot(C2,Ugs_aht,'--g')
hold on
plot(C3,Ugs_aht,'--y')
hold on
plot(C4,Ugs_aht,'--c')
hold on
plot(C5,Ugs_aht,'--k')

Más respuestas (2)

Ameer Hamza
Ameer Hamza el 18 de Mayo de 2020
Editada: Ameer Hamza el 18 de Mayo de 2020

0 votos

There are several syntax errors in your code. Compare it with the following code to see the issues
D = 0.067;
Ugs = [0.047,0.061,0.288,0.344,0.404,0.544,0.709,0.945,1.418,1.891,2.363,2.836,4.727];
Uls = ones(1,13)*0.047;
Uls1 = ones(1,13)*0.071;
Uls2 = ones(1,13)*0.095;
Uls3 = ones(1,13)*0.142;
g = 9.81;
rho_gas=1.18;
rho_liq=900;
Ugs_aht= Ugs *((rho_gas).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls_aht= Uls *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls1_aht= Uls1 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls2_aht= Uls2 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
Uls3_aht= Uls3 *((rho_liq).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
C = ((Ugs_aht).^0.5) + ((Uls_aht).^0.5);
C1 = ((Ugs_aht).^0.5) + ((Uls1_aht).^0.5);
C2 = ((Ugs_aht).^0.5) + ((Uls2_aht).^0.5);
C3 = ((Ugs_aht).^0.5) + ((Uls3_aht).^0.5);
flow = strings(1,13);
for i = 1:13
if C(i) <= 0.2
flow(i) = 'Bubble';
elseif C1(i) <= 0.89
flow(i) = 'Slug';
elseif C2(i) <= 0.98
flow(i) = 'Transition';
elseif C3(i) >= 1.00
flow(i) = 'Churn';
end
end
% end
Ugs = Ugs.';
Uls = Uls.';
Uls1 = Uls1.';
Uls2 = Uls2.';
Uls3 = Uls3.';
C = C.';
C1 = C1.';
C2 = C2.';
C3 = C3.';
Uls_aht = Uls_aht.';
Uls1_aht = Uls1_aht.';
Uls2_aht = Uls2_aht.';
Uls3_aht = Uls3_aht.';
% flow = flow.';
T = table(Ugs,Uls_aht,Uls1_aht,Uls2_aht,Uls3_aht,C,C1,C2,C3)
Result
T =
13×9 table
Ugs Uls_aht Uls1_aht Uls2_aht Uls3_aht C C1 C2 C3
_____ ________ ________ ________ ________ _______ _______ _______ _______
0.047 0.058011 0.087634 0.11726 0.17527 0.28669 0.34186 0.38826 0.46448
0.061 0.058011 0.087634 0.11726 0.17527 0.29307 0.34824 0.39464 0.47086
0.288 0.058011 0.087634 0.11726 0.17527 0.35431 0.40948 0.45588 0.5321
0.344 0.058011 0.087634 0.11726 0.17527 0.36485 0.42002 0.46642 0.54264
0.404 0.058011 0.087634 0.11726 0.17527 0.37523 0.4304 0.4768 0.55302
0.544 0.058011 0.087634 0.11726 0.17527 0.39678 0.45195 0.49835 0.57457
0.709 0.058011 0.087634 0.11726 0.17527 0.41886 0.47404 0.52044 0.59666
0.945 0.058011 0.087634 0.11726 0.17527 0.44636 0.50154 0.54794 0.62416
1.418 0.058011 0.087634 0.11726 0.17527 0.4926 0.54777 0.59417 0.67039
1.891 0.058011 0.087634 0.11726 0.17527 0.53157 0.58674 0.63314 0.70936
2.363 0.058011 0.087634 0.11726 0.17527 0.56583 0.621 0.6674 0.74362
2.836 0.058011 0.087634 0.11726 0.17527 0.59687 0.65205 0.69844 0.77467
4.727 0.058011 0.087634 0.11726 0.17527 0.70049 0.75566 0.80206 0.87828

4 comentarios
Mostrar 2 comentarios más antiguos Ocultar 2 comentarios más antiguos

Temidayo BOBOYE
Temidayo BOBOYE el 19 de Mayo de 2020
Editada: Temidayo BOBOYE el 19 de Mayo de 2020
Thanks for the inputs. However, the Ugs of 13 variables are to be used with each of the 4 variables of Uls( for each value of Uls 0.047,0.071,0.095 ,0.142 the corresponding 13 values of Ugs are to be used).The expected Ugs_aht should be 13 values each for the 4 values of Uls. I need to create a dynamic array that stores each value of Ugs_aht to determine the coresponding C, C1, C2 and C3.
I think a for loop might be need
for i=1:13
Ugs_aht= Ugs(i) *((rho_gas).^0.5)/(g * D *(rho_liq - rho_gas)).^0.5;
end
Walter Roberson
Walter Roberson el 19 de Mayo de 2020
ndgrid() or meshgrid()
Temidayo BOBOYE
Temidayo BOBOYE el 21 de Mayo de 2020
This loop should be able to store Ugs for each of the values of Uls and run the script and finally generate the table
Temidayo BOBOYE
Temidayo BOBOYE el 3 de Jun. de 2020
D = 0.067;% Diameter of tube in meters
Ugs = [0.047,0.061,0.288,0.344,0.404,0.544,0.709,0.945,1.418,1.891,2.363,2.836,4.727];
Uls = ones(1,13)*0.047;
Uls1 = ones(1,13)*0.071;
Uls2 = ones(1,13)*0.095;
Uls3 = ones(1,13)*0.142;
Uls4 = ones(1,13)*0.284;
Uls5 = ones(1,13)*0.378;
g = 9.81;% Acceleartion due to gravity (m/s^2)
rho_gas=1.18;% Gas density (Kg/m^3)
rho_liq=900;% Liquid density (Kg/m^3)
for i = 1:13
Ugs_aht(i)= Ugs(i) *((sqrt(rho_gas))/(sqrt(g * D *(rho_liq - rho_gas))));
end
Uls_aht= Uls *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht1= Uls1 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht2 = Uls2 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht3 = Uls3 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht4 = Uls4 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
Uls_aht5 = Uls5 *((sqrt(rho_liq))/(sqrt(g * D *(rho_liq - rho_gas))));
C = (sqrt(Ugs_aht)) + (sqrt(Uls_aht));
C1 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht1));
C2 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht2));
C3 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht3));
C4 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht4));
C5 = (sqrt(Ugs_aht)) + (sqrt(Uls_aht5));
Ugs =Ugs.';
Uls = Uls.';
Uls1 = Uls1.';
Uls2 = Uls2.';
Uls3 = Uls3.';
Uls4 = Uls4.';
Uls5 = Uls5.';
Ugs_aht = Ugs_aht.';
Uls_aht = Uls_aht.';
Uls_aht1 = Uls_aht1.';
Uls_aht2 = Uls_aht2.';
Uls_aht3 = Uls_aht3.';
Uls_aht4 = Uls_aht4.';
Uls_aht5 = Uls_aht5.';
C = C.';
C1 = C1.';
C2 = C2.';
C3 = C3.';
C4 = C4.';
C5 = C5.';
plot(C,Ugs_aht,'--r')
xlabel('C (sqrt(m/s))')
ylabel('Ugs_aht (m/s)')
title('Flooding Mechanism')
T= table(Ugs, Uls,Uls_aht, Ugs_aht, C,C1,C2,C3,C4,C5);
hold on
plot(C1,Ugs_aht,'--b')
hold on
plot(C2,Ugs_aht,'--g')
hold on
plot(C3,Ugs_aht,'--y')
hold on
plot(C4,Ugs_aht,'--c')
hold on
plot(C5,Ugs_aht,'--k')

Iniciar sesión para comentar.

Walter Roberson
Walter Roberson el 18 de Mayo de 2020

0 votos

flow = ones(1,13);
flow = string(flow);
for i = 1:13
if C(i) <= 0.2
flow(i) = 'Bubble';
elseif C1(i) <= 0.89
flow(i) = 'Slug';
elseif C2(i) <= 0.98
flow(i) = 'Transition';
elseif C3(i) >= 1.00
flow(i) = 'Churn';
end
end

Categorías

Más información sobre Loops and Conditional Statements en Centro de ayuda y File Exchange.

Productos

Versión

R2019b

Etiquetas

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by