Cannot connect to Launchpad TMS320F28379D Development Kit

61 visualizaciones (últimos 30 días)
HongPhong Dao
HongPhong Dao el 30 de Sept. de 2020
Comentada: Vinayak el 23 de Nov. de 2023
Hi all,
I tried to connect to TMS320F28379D but not successed when run "Monitor & Tune" with a very simple model, write a "1" to GPIO Output.
The selected "Hardware board" is TI Delfino F28379D LaunchPad.
Cable, Kit are ok because I debuged them using Code Console Studio.
The Configuration Parameters for Hardware Implementation is as attached picture, please have a look.
There have an error as below. I copied from Diagnostic Viewer.
"Device header/source file path for the selected hardware board TI Delfino F28379D LaunchPad is not found. Run targetupdater at the MATLAB command prompt and setup the support package for "Texas Instruments C2000 (Embedded Coder)"."
After run "targetupdater", there have new problem as below. I copied from Command Window of Matlab.
"Unrecognized function or variable 'targetupdater'."
So, I tried to update "Embedded Coder support package for Texas Instruments C2000 processor" to version 20.1.2 and "Embedded Coder support package for Texas Instruments Concerto processor" to version 20.1.2.
But still cannot connect to TMS320F28379D.
Please help me fix this problem.
Thank you so much.
  2 comentarios
Akash Philip
Akash Philip el 2 de Jun. de 2021
I am facing this same issue. Can someone help.
Joel Brofors
Joel Brofors el 7 de Jul. de 2021
Same for me.
Have the code from my diagnostic viewer if it can help for debugging.
Have following the guides given by Matlab.
Running Matlab 2021a and have every possible extension.
(Have done a correct installation of the needed toolboxes for TI Delfino F28379D)
I had no problem to get my microchip to work. But this board is much better and something I want to use.
Best Regards Joel
### Starting build procedure for: workout ### Generating code and artifacts to 'Model specific' folder structure ### Generating code into build folder: C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw
Warning: File 'codedescriptor.dmr' not found. [4 similar]
### Invoking Target Language Compiler on workout.rtw ### Using System Target File: C:\Program Files\MATLAB\R2021a\rtw\c\ert\ert.tlc ### Loading TLC function libraries ### Initial pass through model to cache user defined code . ### Caching model source code ### Writing header file workout_types.h ### Writing header file workout.h ### Writing header file rtwtypes.h ### Writing source file workout.c . ### Writing header file workout_private.h ### Writing source file workout_data.c ### Writing header file rtmodel.h ### Writing source file ert_main.c ### TLC code generation complete. ### Evaluating PostCodeGenCommand specified in the model
Code Composer Studio Project
1
Elapsed: 0.566 sec
### Creating CCS Project at : C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\CCS_Project ### CCS project created successfully Open project in Code Composer Studio.
### Using toolchain: Texas Instruments Code Composer Studio (C2000) ### 'C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\workout.mk' is up to date ### Building 'workout': "C:\PROGRA~1\MATLAB\R2021a\bin\win64\gmake" DEPRULES=1 -f workout.mk all C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw>cd . C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw>chcp 1252 Active code page: 1252 C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2021a\bin\win64\gmake" DEPRULES=1 -f workout.mk all ) else ("C:\PROGRA~1\MATLAB\R2021a\bin\win64\gmake" DEPRULES=1 -f workout.mk ) "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="MW_c28xx_csl.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="MW_c28xx_csl.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/MW_c28xx_csl.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="MW_c28xx_board.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="MW_c28xx_board.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/MW_c28xx_board.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="MW_c28xx_xbar.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="MW_c28xx_xbar.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/MW_c28xx_xbar.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="workout.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="workout.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/workout.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="workout_data.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="workout_data.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/workout_data.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="c2837xDBoard_Realtime_Support.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="c2837xDBoard_Realtime_Support.obj" "C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/src/c2837xDBoard_Realtime_Support.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="MW_c28xGlobalInterrupts.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="MW_c28xGlobalInterrupts.obj" "C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/src/MW_c28xGlobalInterrupts.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="profiler_Support.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="profiler_Support.obj" "C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/target/supportpackages/tic2000/src/profiler_Support.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="MW_c28xGPIO.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="MW_c28xGPIO.obj" "C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/src/MW_c28xGPIO.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="c2837xDSchedulerTimer0.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="c2837xDSchedulerTimer0.obj" "C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/src/c2837xDSchedulerTimer0.c" "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi --compile_only --preproc_dependency="ert_main.dep" --preproc_with_compile --large_memory_model --silicon_version=28 --define="LARGE_MODEL" -I"/~SupportFiles/DSP280x_headers" -I"/~SupportFiles/DSP280x_headers/include" -I"C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/include" -g -v28 --float_support=fpu32 -ml -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 --tmu_support=tmu0 --fp_mode=relaxed -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DDAEMON_MODE=1 -DXCP_CUSTOM_PLATFORM -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DMW_PIL_SCIFIFOLEN=16 -DF2837X_REG_FORMAT -DMW_F2837XD -DSTACK_SIZE=64 -DRT -DF28379D -DCPU1 -DBOOT_FROM_FLASH=1 -DMODEL=workout -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Joel/Documents/MATLAB/simulink_work -IC:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw -IC:/PROGRA~1/MATLAB/R2021a/extern/include -IC:/PROGRA~1/MATLAB/R2021a/simulink/include -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2021a/rtw/c/ert -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/inc -IC:/PROGRA~1/MATLAB/R2021a/toolbox/shared/can/src/scanutil -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/shared/SUPPOR~1/tic2000/inc -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~4/include -IC:/ti/CONTRO~1/DEVICE~1/F2837xD/v190/F2837X~1 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/shared/EXTERN~1/include -IC:/PROGRA~1/MATLAB/R2021a/toolbox/rtw/targets/common/can/blocks/tlc_c --output_file="ert_main.obj" "C:/Users/Joel/Documents/MATLAB/simulink_work/workout_ert_rtw/ert_main.c" "### Creating standalone executable "../workout.out" ..." "C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/cl2000" --abi=coffabi -z -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/lib --stack_size=64 --warn_sections --heap_size=1024 --reread_libs --rom_model --priority -m"workout.map" -l"rts2800_fpu32.lib" --define F28379D --define CPU1 --define BOOT_FROM_FLASH=1 --define BOOT_USING_BL=0 --output_file=../workout.out MW_c28xx_csl.obj MW_c28xx_board.obj MW_c28xx_xbar.obj workout.obj workout_data.obj c2837xDBoard_Realtime_Support.obj MW_c28xGlobalInterrupts.obj F2837xD_CpuTimers.obj F2837xD_DefaultISR.obj F2837xD_GlobalVariableDefs.obj F2837xD_PieCtrl.obj F2837xD_PieVect.obj F2837xD_SysCtrl.obj F2837xD_usDelay.obj F2837xD_CodeStartBranch.obj F2837xD_Dma.obj F2837xD_Adc.obj F2837xD_Gpio.obj F2837xD_Ipc_Driver_Lite.obj F2837xD_Emif.obj profiler_Support.obj MW_c28xGPIO.obj c2837xDSchedulerTimer0.obj ert_main.obj C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/rtlib/IQmath_fpu32.lib C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/shared/supportpackages/tic2000/src/c2837xDPeripherals.cmd C:/ProgramData/MATLAB/SupportPackages/R2021a/toolbox/target/supportpackages/tic2000/src/c28377D.cmd <Linking> "### Created: ../workout.out" "### Invoking postbuild tool "Hex Converter" on "../workout.out"..." C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/3P778C~1.INS/TIC200~1.INS/TI-CGT~1.LTS/bin/hex2000 -i "../workout.out" -o "../workout.hex" -order MS -romwidth 16 -q "### Done Invoking postbuild tool "Hex Converter" ..." "### Invoking postbuild tool "DWO Converter" on "../workout.out"..." C:/PROGRA~3/MATLAB/SUPPOR~1/R2021a/toolbox/target/SUPPOR~1/tic2000/../../../shared/supportpackages/tic2000/tools/bin/win64/extractDWARF.exe "../workout.out" *** Starting extraction of debug information from TI-COFF *** Loaded : ../workout.out, and identified as TI-COFF Opened : ../workout.dwo for write coff -> dwo conversion completed successfully.. "### Done Invoking postbuild tool "DWO Converter" ..." "### Successfully generated all binary outputs." C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw>exit /B 0 Downloading program to the target hardware...
Build Summary
1
Elapsed: 0.3 sec
Top model targets built: Model Action Rebuild Reason =================================================================== workout Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 0m 36.356s
The following error occurred during deployment to your hardware board: Debug Server Scripting (DSS) error: *** User inputs: Target Configuration: undefined Program Name: undefined Board Name: unspecified (connect to first board) CPU Name: unspecified (connect to first CPU) Hardware Name: unspecified Boot From Flash: unspecified *** Starting debug session... SEVERE: Cannot read System Setup data from XML file C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\undefined Error parsing file: Fatal Error at (0, 0): An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\undefined SEVERE: Could not start server: DebugServer.1: Cannot read System Setup data from XML file C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\undefined Error parsing file: Fatal Error at (0, 0): An exception occurred! Type:RuntimeException, Message:The primary document entity could not be opened. Id=C:\Users\Joel\Documents\MATLAB\simulink_work\workout_ert_rtw\undefined *** Cannot create a valid debug session for Board/CPU=*/*. Make sure this matches only one board and one CPU. Exiting... .

Iniciar sesión para comentar.

Respuestas (4)

Aditya Padmanabha
Aditya Padmanabha el 18 de Oct. de 2021
Hi HongPong, Akash,
Please configure the support package after installation. To configure the support package, you can go to Matlab, Add-Ons, Manage Add-Ons, which will list the installed Add-Ons. For the right side of Embedded coder support package of TI C2000 in the Add-On list click the Gear icon for setup.
Hi Joel,
We have observed this issue with CCS ver 10.3.x , older version of CCS does not have this problem. Please try CCS v10.2 or below. You can refer to the below post for more details
https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/998572/tmdscncd280025c-unable-to-download-executable-using-ccsv1030/3690401#3690401
Thanks,
Aditya

Taimur Zaman
Taimur Zaman el 13 de Mzo. de 2022
Hi,
  1. Make sure you have CCS 9 or older version for F2379D Version.
  2. Made my controller restart and updated the baud-rate. for SCI_A my baude rate was 5e5, i changed it to 115200 and it started working.
  1 comentario
Devanand Kumar
Devanand Kumar el 31 de Mayo de 2022
I'm using CCS 10.4 and it's working fine. I have used the sampling time of 1e-6

Iniciar sesión para comentar.


Hitesh Dialani
Hitesh Dialani el 17 de Ag. de 2022
I had the same problem. Just like what Aditya Padmanabha mentioned the Embedded coder support package of TI C2000 in the Add-On was not setup. I followed this video and it fixed it https://nl.mathworks.com/videos/getting-started-with-embedded-coder-support-package-for-ti-c2000-processors-1573540550102.html?s_tid=vid_pers_recs

Mowei Lu
Mowei Lu el 23 de Feb. de 2023
Hi, I have met the similar problem. Have you solved it ?
  1 comentario
Vinayak
Vinayak el 23 de Nov. de 2023
Hi, I have met the similar problem.
Loading the program to the target... WARNING: C28xx_CPU1: Loader: One or more sections of your program falls into a memory region that is not writable. These regions will not actually be written to the target. Check your linker configuration and/or memory map. SEVERE: C28xx_CPU1: File Loader: Verification failed: Values at address 0x83390@Program do not match Please verify target memory and memory map. SEVERE: C28xx_CPU1: GEL: File: C:\Users\VINAYAK\DOCUME~1\MATLAB\Examples\R2021a\TEXASI~1\GETTIN~1\C28379~1.OUT: a data verification error occurred, file load failed.

Iniciar sesión para comentar.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by