How to read data from ThingSpeak and control led using sim800L?
13 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I'm working on SIM800L with arduino and try to read data from ThingSpeak. I can read my channel field last value (1 or 0) using AT+HTTPREAD command. But the content get from sim800L.read() is -1 not one or zero. I want to read 1 or 0 and then turn on/off LED. How to get the data of field from the response of AT+HTTPREAD? Please find the code as follows:
{.....
SIM800L.println("AT+HTTPPARA=\"URL\",\"http://api.thingspeak.com/channels/xxxxxxx/fields/3/last?api_key=xxxxxxxxxxxxxx\"");
delay(1000);
ShowSerialData();
SIM800L.println("AT+HTTPACTION=0");
delay(10000);
ShowSerialData();
SIM800L.println("AT+HTTPREAD");
delay(300);
ShowSerialData();
changeled();
ShowSerialData();
SIM800L.println("");
delay(100);
}
void changeled()
{
String content = "";
Serial.println(SIM800L.read());
content = content + String(SIM800L.read());
Serial.print("Content:");
Serial.println(content);
}
3 comentarios
Christopher Stapels
el 14 de Oct. de 2022
-1 is for unauthorized. Perhaps it is a private channel you are trying to read?
Anzaku Engla
el 27 de Abr. de 2023
First of all you have to be sure you can read AT command reply from the SIM800 first. If you can do this your solution is close
Respuestas (1)
Vinod
el 21 de Sept. de 2021
Editada: Vinod
el 21 de Sept. de 2021
Is the SIM card activated? Have you confirmed that you can connect to the internet with the SIM800L module and your SIM card? Does your GSM provider support the use of their SIM card in the SIM800L module? See this video.
0 comentarios
Comunidades de usuarios
Más respuestas en ThingSpeak Community
Ver también
Categorías
Más información sobre REST API en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!