problem about ODE (Rayleigh-Plesset Equation) error in ode15s

Now , i simulate Rayleigh-Plesset Equation and i did the Function which is

function f = RP(t,y)
p_ref = 1e5; %reference pressure Pa
rho = 1e3; %density of fluid kg/m3
g = 1; %polytropic exponent Unitless
R0=0.0005;
f= [y(2);( pulse(t) - p_ref + p_ref*(R0./y(1))^(3*g) )/(rho*y(1))-(1.5*y(2)^2/(y(1)))];
return;

and this is the Pulse code

function z=pulse(t)
global A w t0 sigma env%accept globals.
z = A*sin(w*t); %no window
return

and this is the Solution

[T,R] = ode15s('RP',[0 3e-8],[1e-6 70]);
plot(T,R(:,1)),xlabel('time'),ylabel('Radius')

no i have this problem

??? Error using ==> odearguments at 103
RP returns a vector of length 1, but the length of initial conditions vector is 2. The
vector returned by RP and the initial conditions vector must have the same number of
elements.

Error in ==> ode15s at 227
[neq, tspan, ntspan, next, t0, tfinal, tdir, y0, f0, odeArgs, odeFcn, ...

Error in ==> solv at 6
[T,R] = ode15s('RP',[0 3e-1],[1e-6 70]);

what can i do ? i need a help i got the Signal simulation before but i did dome change , now i cant return

Answer 1

[Navid]

I am using ode45 to solve this equation. I am considering everything such as surface tension, viscosity, and acoustic pressure. I will get good results when the oscillations are stable. And by stable I mean there is no sudden collapses and bubble oscillation is not huge comparing to its initial radius. But when the oscillations become huge, and oscillations get transient, I am not getting good results. bubble radius reaches to very very small values but again rebounds to huge values. Any experience of suggestions? Is it better to use another ODE solver?

[Ahmed Mehrem]

Thank you ,i find the solution of this problem. and you are Right i am also used ode45 and the solution is very good and nearly the same with Experimental Part

Answer 2

[bym]

check your call to ode15s

[T,R] = ode15s('RP',[0 3e-8],[1e-6 70]); %your code

what does the following give you?

[T,R] = ode15s(@RP,[0 3e-8],[1e-6 70]);

[Ahmed Mehrem]

the same problem :(