Unpacking structured Data with multiple Fields

4 views (last 30 days)
I was wondering if anyone has any experience of extracting data variables from mulitple structures?
What I would like to do is extract the data contained in .measurement.transient.timeDomain for each structure, see pic below The data is contained as structures with 110 fields. I can do this for one of the Field lines at a time, but is there a way to extract all the data in one go? The picture below show the structure and the bottom pic shows the data in a single 1x1 timeDomain structure.
Kind regards,
Andy Wileman
Andy Wileman on 14 Mar 2021
Hi Walter,
Thanks for getting back to me. Yes that sounds correct, there are 110 elements(or rows). I click on the initial structure 'measurement' which brings up all the measurements, then click on measurement.transient. This contains that data I require (timeDomian).
What I was aiming to do is generate 110 data files. These will have the "date information" from each row as their file name, and the data contained in the measurement.transient.timeDomain structure for that row. This seems to be the required formart for importing into the Predictive Maintenance Toolbox (apparently, it can read the date/time from the file name header).
I'm afraid where I understand the basics of Matlab, structures scare me to death. I was just wondering if its possible to automate the process as I have similar data from other devices.
and is set number 8. IGBT Accelerated Aging Data Set
IGBTAgingData_04022009.zip\IGBTAgingData_04022009\Data\Thermal Overstress Aging with Square Signal at gate and SMU data\Aging Data
Kind regards,

Sign in to comment.

Accepted Answer

Aghamarsh Varanasi
Aghamarsh Varanasi on 16 Mar 2021
Hi Andy,
If you want to create a variable to store the data contained in 'measurement.transient.timeDomain', you can use the following syntax. This will save all the structures in a cellarray.
data = {measurement.transient.timeDomain}.';
Hope this helps
Andy Wileman
Andy Wileman on 16 Mar 2021
Hi Aghamarsh,
I've got this far. I'm still having problems saving the time and date information contained in dateName as a filename, I've tried to use a conversion via datenum, so it doesn't contain any symbols that aren't allowed. Also, the timeDom is still in the form of a structure not a double. I wondered if you may have any ideas?
Kind regards,
L = length(measurement.transient);
for i = 1:L
dateName = {measurement.transient(i).date};
timeDom = {measurement.transient(i).timeDomain};
% TODO: Save files
%t = datenum(dateName,'dd/mm/yyyy,HH:MM:SS');
save(['Data' num2str(i) 't'],'timeDom')

Sign in to comment.

More Answers (0)





Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by