Why is my custom constraint for adaptive MPC controller not working?

I am using Adaptive MPC controller in simulink to control a system with 4 states (same as 4 outputs) and 2 control inputs. Since the system is in the form of xdot=A*x+B*u+dc, "dc" is a constant matrix(4x1), so I regard them as "measured disturbance".

What I mean to do is let the system follow a reference [0 0 0 0]' and after 1 second, the fourth state(x(4)) is constrained to be less than 0 (force the system to deviate from the reference). So I let costum constriant E=zeros(1,2), F=[0 0 0 1], S=zeros(1,4), G is changing from 0 to -9. (as figure 2 shows, equally x(4)<G).

But the states never change. Neither do control inputs. They all remain zero as long as the reference is [0 0 0 0]'. It is as if the constraint is never set up. I could not find the way to work it out. But when I used ymax and ymin instead, it can be controlled to deviate from the reference. Still, I need to use custom constraints in the end.

Here I attached my files. Run 'controller_setup' first before you go to 'model.slx'.