Delete every second element in array
87 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Bruce Rogers
el 3 de Mayo de 2021
Comentada: Philipp Brogli
el 12 de En. de 2024
Hello everyone,
for my research project I'm trying to let a robot move a sine curve (only in a z axis up and down). The problem is, that if two points are very close to each other (i.e. 0.2mm) the robot gets really slow, stays still for like half a second and then moves on, so the total time isn't the same. Now in my code I'm trying to delete every second point (and then double the time in between these points in RoboDK), but I can't figure out how to do this in an if loop. Like really important is, that the extreme values must be kept, so the robot can move to the endpositions and I'll get a sine curve.
Here's my code so far:
clear;
A = 50;
t = 0.05;
x = 0:0.05:10*pi;
y = -A*sin(x) + 389.387; %389.387 is the start position of the robot, he only moves in z-axis
T = (1:length(x))*t;
figure(1)
plot(T,y,'.')
xlabel('time')
ylabel('distance')
hold on
%%
newpoints = zeros(1,(length(y)));
newpoints(1,1) = y(1,1);
for i = 3:length(y)
if (y(i) - y(i-1)) < 0.2 %Check, if distance under 0.2mm
if (sign(y(i)-y(i-1))) ~= (sign((y(i-1)-y(i-2)))) %Check if it's an extreme value, because of sign change
newpoints(i-1) = y(i-1);
elseif i == 1:2:length(y) %This is where the trouble begins, I dont't know how to tell Matlab to delete every second point
newpoints(i-1) = [];
end
end
end
figure(1)
plot(T,newpoints,'r.')
xlabel('time')
ylabel('distance')
I'm using Matlab R2020 for academic use. I'd be really glad if you guys could help me out!
0 comentarios
Respuesta aceptada
Adam Danz
el 3 de Mayo de 2021
Editada: Adam Danz
el 3 de Mayo de 2021
To delete every second element in an array starting with element #2,
x(2:2:end) = [];
or starting with element #1,
x(1:2:end) = [];
But to ensure you never delete the endpoints,
x(2:2:end-1) = [];
To preserve indexing, you can insert NaN values instead of removing elements,
x(2:2:end) = nan;
x(1:2:end) = nan;
x(2:2:end-1) = nan;
7 comentarios
Adam Danz
el 4 de Mayo de 2021
Editada: Adam Danz
el 4 de Mayo de 2021
> I need a loop to clarify if the distance between two points is nearer than 0.2mm.
Scott's advice is spot-on.
Alternatively, instead of
z = sqrt(diff(x).^2 + diff(y).^2);
you could use,
z = hypot(diff(x), diff(y));
which is probably the same thing in Scott's approach (we don't have access to the hypot code) but the documentation claims that hypot avoids underflow and overflow. I compared both approaches and they are equally speedy and the difference in results is less than 4.4409e-16 which is just roundoff error.
Más respuestas (1)
Scott MacKenzie
el 3 de Mayo de 2021
Editada: Scott MacKenzie
el 3 de Mayo de 2021
As per your question (Delete every second element in array) ...
x = 1:10
y = x(rem(x,2)==1)
Output:
x =
1 2 3 4 5 6 7 8 9 10
y =
1 3 5 7 9
2 comentarios
Philipp Brogli
el 12 de En. de 2024
The problem with this aproach is that it just removes any value that is divideable by 2. If you have a different vector x, for example [1,3,5,7,9], then it wouldn't work anymore.
Ver también
Categorías
Más información sobre 3-D Scene Control en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!