error message with daq

i have matlab 2012a and i want to use ni daq so i typed 'daqhwinfo" and error message appeared

Error using daqhwinfo (line 42)
To learn about using data acquisition devices on the win64 platform,
see the documentation on the session-based interface.

when i typed "daq.getVendors()" it gives

%Data acquisition vendor 'National Instruments':

              ID: 'ni'
        FullName: 'National Instruments'
  AdaptorVersion: '3.1 (R2012a)'
   DriverVersion: 'unknown'
   IsOperational: false

%Warning: Diagnostic Information from vendor: NI: There was a driver
error while
loading the MEX file to communicate with National Instruments
hardware.
It is possible that the NI-DAQmx driver is not installed or is older
than
the required minimum version of '9.1'.
Additional information:
'Invalid MEX-file
'F:\mat12\toolbox\daq\daq\+daq\+ni\private\mexNIDAQmx.mexw64': The
specified module could not be found.'

[dpb]

Looks like first thing to do would be to look at versions for the driver installed and updates and perhaps a reinstallation.

[Andreas Georgiou]

Hello Mado,

did you manage to resolve your issue? It seems I have the exactly the same one. My drivers are up to date but I still get the same error. If you have an idea why the error appears it will be of great help.

I am using Windows 10, 64-bit and installed the latest drivers from NI (v15.x). The device appears to work properly from the device manager.

Many thanks

Andreas

The full error is:

>> daq.getVendors

ans =

Data acquisition vendor 'National Instruments':

            ID: 'ni'
      FullName: 'National Instruments'
AdaptorVersion: '3.7 (R2015a)'
 DriverVersion: 'unknown'
 IsOperational: false

Warning: Diagnostic Information from vendor: NI: There was a driver error while loading the MEX file to communicate with National Instruments hardware. It is possible that the NI-DAQmx driver is not installed or is older than the required minimum version of '9.1'. Additional information: 'Invalid MEX-file 'C:\Program Files\MATLAB\R2015a\toolbox\daq\daq\+daq\+ni\private\mexNIDAQmx.mexw64': The specified module could not be found.'

Properties, Methods, Events

Additional data acquisition vendors may be available as downloadable support packages. Open the Support Package Installer to install additional vendors.

>>