Loss Calculation in a Buck Converter Using SimPowerSystems and Simscape

Versión 1.0.0.0 (1,07 MB) por Pierre Giroux
A SimPowerSystems model is used to calculate switching and conduction losses in a buck converter.
5.0
(4)
4,7K Descargas
Actualizado 3 abr 2012

Ver licencia

Nota del editor: This file was selected as MATLAB Central Pick of the Week

A 12-kW buck converter is implemented by a half-bridge IGBT detailed model. Based on the thermal characteristics of the selected IGBT module, both switching and conduction losses are calculated. Thermal blocks of the Simscape foundation library are used to model the heat dissipation provided by the heat sink. The simulation illustrates the impact of switching frequency and load on the total losses of the buck converter.

You can select among three different commercial IGBT modules. A procedure given in .m files allows you to add your own device characteristics in the provided component libraries.

A Help file containing useful information on the model is also included.

Authors: Pierre Giroux, Gilbert Sybille, Olivier Tremblay
Hydro-Quebec Research Institute (IREQ)

Citar como

Pierre Giroux (2024). Loss Calculation in a Buck Converter Using SimPowerSystems and Simscape (https://www.mathworks.com/matlabcentral/fileexchange/35980-loss-calculation-in-a-buck-converter-using-simpowersystems-and-simscape), MATLAB Central File Exchange. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2011b
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux
Comunidades de usuarios

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

LossCalculationBuckConverter/

LossCalculationBuckConverter/

Versión Publicado Notas de la versión
1.0.0.0