"Getting Started with Stateflow" example files
Example files for the "Getting Started with Stateflow" video.
Ahora está siguiendo esta publicación
- Verá actualizaciones en las notificaciones de contenido en seguimiento.
- Podrá recibir correos electrónicos, en función de las preferencias de comunicación que haya establecido.
Explore the models created in the "Getting Started with Stateflow" video.
https://www.mathworks.com/videos/getting-started-with-stateflow-1608719415568.html
model1_batteryFirst.slx - Model using the battery if there is any charge.
model2_smartDecision.slx - Model using the battery only during peak hours, or when the signal from the Weather Detector indicates it has been sunny.
All models were created and saved in R2020b. If you are using an earlier release, do the following before opening any models:
(1) Click Preferences in the Home tab of the MATLAB toolstrip.
(2) In the Preferences dialog, select the Simulink pane and then click Open Simulink Preferences.
(3) In the Simulink Preferences dialog, select the Model File pane.
(4) Clear the "Do not load models created with a newer version of Simulink" option.
Citar como
Dave Guglielmo (2026). "Getting Started with Stateflow" example files (https://github.com/mathworks/getting-started-with-stateflow/releases/tag/1.0.2), GitHub. Recuperado .
Información general
- Versión 1.0.2 (338 KB)
-
Ver licencia en GitHub
Compatibilidad con la versión de MATLAB
- Compatible con cualquier versión desde R2019b
Compatibilidad con las plataformas
- Windows
- macOS
- Linux
| Versión | Publicado | Notas de la versión | Action |
|---|---|---|---|
| 1.0.2 | See release notes for this release on GitHub: https://github.com/mathworks/getting-started-with-stateflow/releases/tag/1.0.2 |
||
| 1.0.1 | See release notes for this release on GitHub: https://github.com/mathworks/getting-started-with-stateflow/releases/tag/1.0.1 |
