Community Profile

photo

cr28


Con actividad desde 2012

Followers: 0   Following: 0

Contacto

MSc
Professional Interests: energy storage systems, smart grids, renewable energy sources

Estadísticas

All
  • 5-Star Galaxy Level 3
  • Personal Best Downloads Level 2
  • First Review
  • First Submission
  • Thankful Level 1
  • Revival Level 1
  • First Answer

Ver insignias

Feeds

Ver por

Enviada


data file to the post 'grid energy storage battery'
data file of real and reactive power for 24 hrs with a 1 minute resolution

más de 11 años hace | 3 descargas |

Enviada


grid energy storage battery
this circuit was built to simulate energy storage at the low voltage network.

más de 11 años hace | 17 descargas |

Thumbnail

Pregunta


odd values of real and reactive power
In an electrical network model i built, there's a transformer that steps down voltage to 240V. I'm getting values of reactive ...

más de 11 años hace | 0 respuestas | 0

0

respuestas

Respondida
combining/concatenation mat files
thanx Azzi but this gives me a file with data written side by side i.e i get a file with 12 column...how do i merge them one bel...

más de 11 años hace | 0

Pregunta


combining/concatenation mat files
Hi, i have 4 mat files in the array format(these files are outputs from a simulink model). the variables are the same in all ...

más de 11 años hace | 5 respuestas | 0

5

respuestas

Pregunta


difference in values from similar blocks
I'm doing a discrete mode simulation of an electrical network using simpower systems. the loads in the model have a P/Q ration o...

más de 11 años hace | 0 respuestas | 0

0

respuestas

Pregunta


SIMULINK model error with 'to file'
A simulink model i created worked fine on my university system and laptop. I then added a few 'to file' blocks (to save on ram d...

más de 11 años hace | 2 respuestas | 0

2

respuestas

Pregunta


transformer output amplitude increasing oscillations
An electrical circuit I have been building is giving me strance oscillations just downstream of the transformer. The circut and ...

más de 11 años hace | 1 respuesta | 0

1

respuesta

Pregunta


using the correct source
the controlled voltage and the three-phase source block appear to be ideal voltage sources because in a simulink model that has ...

más de 11 años hace | 0 respuestas | 0

0

respuestas

Pregunta


Choosing a simulation type
Hi, I'm modelling an electrical network for a 24 hour period and looking at voltage swings and regulation.Continuous mode with ...

más de 11 años hace | 1 respuesta | 0

1

respuesta

Respondida
Flywheel modeling in Simulink
did you figure it out thos?

más de 11 años hace | 2

Pregunta


phasor vs continuous simulation
running 'power_dynamicload' from the command line brings up the model of the dynamic load example. *1]* running it in phasor ...

más de 11 años hace | 1 respuesta | 0

1

respuesta

Pregunta


Simulink: Dynamic load, external PQ
A followup question to this..... http://www.mathworks.com/matlabcentral/answers/10424 Hi, I'm doing something similar to wha...

más de 11 años hace | 0 respuestas | 0

0

respuestas

Respondida
How to use a lookup table to feed parameters to a dynamic load ? Or some other way to easily adjust load PQ values? (simulink - simpower)
Hi, I'm doing something similar to what Radu did/tried to do ie external control of PQ using the demand data I have over 24 hour...

más de 11 años hace | 0

Respondida
single phase and three phase dynamic load
Samir, All i can say is when i simulated a 3-phase dynamic load in phasor mode, the simulation was quick.....a lot quicker th...

más de 11 años hace | 0

Pregunta


control system for battery
I'm working on grid level electrical storage. The modelling process is being performed in simulink and i began using for the fir...

más de 11 años hace | 0 respuestas | 0

0

respuestas