Main Content

La traducción de esta página está obsoleta. Haga clic aquí para ver la última versión en inglés.

Configuración del ajuste de modelos de Simulink

Configure modelos de Simulink® para el ajuste en la línea de comandos

Para ajustar un modelo de Simulink en la línea de comandos, utilice la interfaz slTuner para configurar el modelo para el ajuste, especifique los bloques que se han de ajustar y especifique los puntos de análisis. La interfaz slTuner almacena una aproximación lineal del modelo de Simulink y otro tipo de información necesaria para ajustar el sistema. Para ver un ejemplo, consulte Create and Configure slTuner Interface to Simulink Model. (El ajuste de modelos de Simulink requiere el software Simulink Control Design™).

Funciones

expandir todo

slTunerInterface for control system tuning of Simulink models
slTunerOptionsSet slTuner interface options
addBlockAdd block to list of tuned blocks for slTuner interface
addOpeningAdd signal to list of openings for slLinearizer or slTuner interface
addPointAdd signal to list of analysis points for slLinearizer or slTuner interface
refreshResynchronize slLinearizer or slTuner interface with current model state
removeAllOpeningsRemove all openings from list of permanent openings in slLinearizer or slTuner interface
removeAllPointsRemove all points from list of analysis points in slLinearizer or slTuner interface
removeBlockRemove block from list of tuned blocks in slTuner interface
removeOpeningRemove opening from list of permanent loop openings in slLinearizer or slTuner interface
removePointRemove point from list of analysis points in slLinearizer or slTuner interface
setBlockParamSet parameterization of tuned block in slTuner interface
setBlockRateConversionSet rate conversion settings for tuned block in slTuner interface
setBlockValueSet value of tuned block parameterization in slTuner interface
writeBlockValueUpdate block values in Simulink model
writeLookupTableDataUpdate portion of tuned lookup table
getBlockParamGet parameterization of tuned block in slTuner interface
getBlockRateConversionGet rate conversion settings for tuned block in slTuner interface
getBlockValueGet current value of tuned block parameterization in slTuner interface
getOpeningsGet list of openings for slLinearizer or slTuner interface
getPointsGet list of analysis points for slLinearizer or slTuner interface
showTunableShow value of parameterizations of tunable blocks of slTuner interface

Temas