Figure 5. Initial design generated by the PID Tuner - MATLAB
Current Time 0:00
Duration 0:53
Loaded: 18.77%
Stream Type LIVE
Remaining Time 0:53
 
1x
  • Chapters
  • descriptions off, selected
  • captions off, selected
  • en (Main), selected

    Figure 5. Initial design generated by the PID Tuner

    This example shows the setpoint tracking response of the closed-loop system with this initial PID design. (No Audio)

    Recorded: 1 Jun 2010

    Related Products

    Feedback

    Up Next:

    Design PID controllers using Control System Toolbox.

    PID Control Design with Control System Toolbox

    Related Videos:

    Learn how to tune PID controllers when a plant model is not available and you cannot easily create one from first principles.

    PID Controller Tuning Based on Measured Input-Output Data

    Learn frequency domain characteristics of common compensators such as lead, lag, and PID controllers using Bode plots in this MATLAB Tech Talk by Carlos Osorio.

    Lead, lag, and PID compensator structures using bode plots

    In this webinar you will learn how to design and implement a PID controller when a plant model is not available. Through a DC motor control example, you will learn how to: Apply input signals (voltage) to the motor and collect output (angular positio

    Data-Driven Control: How to Design a Controller When Plant...

    Design control systems with the Control System Designer app.

    Control System Design with the Control System Designer App

    View more related videos