Wireless systems are becoming pervasive and the need to reduce the overall area and power imposes challenging requirements on the RF front-ends. For this reason, smart RF systems make extensive use of digital signal processing algorithms to calibrate and compensate the RF impairments. Algorithms such as Digital Pre Distortion, adaptive filtering, and automatic gain control are integral part of all modern wireless systems and they require to be designed together with the analog and RF front end. In this webinar, we will see how these algorithms can be developed and simulated together with accurate models of RF transmitters and receivers.
Examples of multi-domain system-level simulation will show how virtual testbenches allow you to experiment with different scenarios, and tune the algorithms and the front-end architecture for optimal performance. Without system-level simulation, the algorithms can only be tested late in the development cycle, when a prototype is developed.
You will see how system level testbenches, where RF, analog and digital can be rapidly simulated together, are key to faster development and easier debugging. We will use wide-band standard-compliant LTE signals and metrics to test the front-end behavior and and verify if the specs of the design are met. The simulation speed achieved with MATLAB and Simulink is the key enabler to manage the complexity of today’s wireless systems.
Webinar highlights include:
Recorded: 9 Jun 2015
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.