From the series: How a Differential Equation Becomes a Robot
Carlos Osorio, MathWorks
In Part 4 of this five-part webinar series we perform basic kinematic analysis. We show how to bring results of symbolic studies into the Simulink environment. We also show general optimization techniques, automatic report generation and how to create stand-alone applications. We also describe how to connect your model to a virtual reality environment for three-dimensional visualization.
About the presenter: Carlos Osorio received a B.S. from the Pontificia Universidad Catolica del Peru and an M.S. from the University of California at Berkeley, both in Mechanical Engineering. He specializes in Automatic Control Systems and Vehicle Dynamics. Before joining The MathWorks in October of 2007, he worked in the automotive industry in the Advanced Chassis Technology Department at Visteon Corporation, where he was involved in the development and implementation of prototype electronic active and semi-active suspensions, steer-by-wire and brake-by-wire systems for passenger vehicles.
Recorded: 11 May 2012
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.